QMS Completes Another Succesful High Friction Contract For Devon County Council
QMS recently and successfully completed the annual High Friction Surfacing contract for Devon County Council. The contract consisted of 6500m2 of BBA HAPAS Type 1 MMA Resin with a 1mm to 3mm Buff Chinese Bauxite and reinstating any line markings affected.
Most of the works had to be carried out during restricted hours at night, to reduce disruption to the travelling public. The advanced properties of using a Methyl Methacrylate resin allow us to lay the resin during winter and from an astonishing minimum 0°C ambient temperature, most Epoxy based systems require at least 10°C. With its minimal odour and extremely fast curing times of less than an hour, these are just some of the reasons that enabled us to complete on time and on budget.
Minimising disruption to the travelling public and the very high durability was a prime consideration by Devon County Council when they specified the system. The fast cure and high durability also has the added benefit of reducing Carbon Footprint and CO2 emissions through minimising delays and reduced replacement costs.
Working closely with Devon County Council Highways Engineers and our supply chain partners, we have again delivered this project on time, on budget and with minimal disruption to the people of Devon, whilst helping to drive down motoring accidents.
Receive the latest about our news and products via email by signing up below.